envirointlcorp.ho@gmail.com +91 9310 744 064

TRUCK MOUNTED FOG CANON, MIST CANON
EIC is, Truck Mounted Fog Canon Manufacturer, Truck Mounted Fog Canon Supplier, Truck Mounted Fog Canon Manufacturer In India, Truck Mounted Fog Canon Supplier In India, Truck Mounted Fog Canon Manufacturers, Truck Mounted Fog Canon Suppliers, Manufacturer Of Truck Mounted Fog Canon In India, Truck Mounted Fog Canon For Port, Truck Mounted Fog Canon For Coal Handling Plant,

We supply Truck-mounted Fog Cannon , complete with all accessories for air-borne dust suppression system, mounted on new Truck Chassis (with built-up Driver’s Cabin), suitable to suppress air-borne fine dust of Coal, Iron Ore, Limestone, Fertilizer, etc. and other cargo, while handling, transporting and stacking of such cargo at port or industry,

These Truck-mounted Fog Cannon Mist Machine is capable of suppressing air-borne dust, generated from different types of materials, including fine and micro fine dust, in open areas / Yards / Railway Sidings / Berths / Sheds, etc.

EIC Truck-mounted Fog Cannon Mist Machine [including Chassis, Water Tank, suitable Diesel Generator (DG) Set or hydraulically driven , Rear Sprinkler, High Pressure Pump, Hose, Nozzle, The machine fitted with 1 (one) no. Multi-stage Centrifugal Pump set, fabricated Water Tank, suitable for horizontal throw range of Water Mist from 20 metres to 50 metres and vertical peak up to 12 metres.

The horizontal throw range of the Water Mist Fog would be in the range of 20 to 50 metres under no-wind conditions.

If the machine is supplied with DG Set than, Suitably rated DG Set with Alternator and all other arrangements (to take the load of Fog Cannon and Pump Sets) in acoustic enclosure, as per the relevant Indian Standards, shall be fitted with residential type silencer. The complete assembly shall be fitted firmly on the Chassis unit.

The Control Panel shall be fabricated from CRCA (Cold Rolled Carbon Annealed) Sheet Steel of minimum 1.5 / 2 mm thick duly pre-treated/powder coated and aesthetically finished.The Control Panel shall be totally enclosed, dust and vermin proof integral type, with IP 53/55 degree of protection as per the relevant Indian Standard(s), with latest amendment(s).

PRESSURIZED REAR SPRINKLER
The Vehicle can be fitted with a Pressurized Rear Sprinkler System.

It may consume maximum 200 lpm of water

Pressurized Rear Sprinkler May spray pressurized water to cover maximum up to 20 m road width in 1/2 pass.

The system shall spray water uniformly over the surface of the road to avoid over wetting

The system is to be designed to sprinkle the water on the roads to suppress the dust which otherwise will enter the atmosphere due to vehicle movements.

Specially designed nozzles are being used for this purpose

There shall be adjustable manual valve to control the water.

ROAD WASHING SYSTEM
(FRONT AND CENTER)


The equpment shall wash Concrete & Hot Mix Roads mainly for Sea Ports internal roads and commercial roads.

Depending upon the condition and width of the road, the system shall have facility to use either 2 front nozzles or 2 side middle nozzles or both at a time.

In single/two pass, The equipment shall wash up to 20 meters width of the roads.

The machine shall consume minimum 400 to 600 liters of water per minute.

Nozzles are made with rust preventive material.